LW7 Spirit Brushless Flywheels

Spirit wheels, but light. These have a 7mm circular crush profile and are intended for Spirit/Hycon motor spacing of 51mm.

INSTRUCTIONS BELOW.

Moderate press fit on the older batches of PlusMotors. The easiest way is to line up your motor holes is to inch them in with a longer screw (M3 x 14-16mm). Spin the screws in 2-3 rotations after you start to feel them pulling the wheel down, then press the wheels the rest of the way in.

Use M3x5 screws for permanent mounting.

The weight of these wheels is 12g each. 25% less moment of inertia than the previous Lightweight Modified wheels from KuryKafe, and 50% less than the solid wheels!