Open Flywheel Projects’s Nerf Hyperfire 3D printed flywheel cage replaces the stock flywheel cage and provides a tighter motor spacing for improved dart crush and velocity. There have been reports that this cage also fits in the Nerf Regulator, but we have not been able to confirm that. The flywheels in this cage are not canted, preventing the whirlybird shots which are common with the stock canted cage. It is also stiffer than the stock cage, reducing noise. This cage is compatible with OFP’s high performance, high concavity Riot flywheels.
Open Flywheel Project cages are available in motor spacings of 43.5 through 41.5mm spacing. The 43.5mm matches a stock Stryfe or Rapidstrike flywheel cage. Closer spacing results in higher crush and faster dart velocities, but requires higher torque motors and has issues with hard tipped darts such as FVJs and Voberries. For 130 motors such as Meishel 2.0's, we recommend 43mm spacing. See OFP's Size Guide for more information.All cages come with the required screws to mount the motors into the cage. If you want a specific color, or PETG instead of PLA, please specify it in the Notes field at checkout. For details on PLA vs PETG, see this page. Currently available colors are:
- Light Orange (eg Demolisher or Rapidstrike)
- Dark Orange (eg Stryfe)
- Navy (Elite) Blue
- Translucent Light Orange
- Glow in the dark